How To Make Knife Throwing Target – DIY Guide

How To Make Knife Throwing Target - DIY Guide - post cover

Table of Contents

How To Make Knife Throwing Target – DIY Guide

This article provides some tips on how to make a knife-throwing target.

Trying to make a knife-throwing target is not as easy as it sounds. You need to have the right materials and tools for it to work properly.

How To Make A Throwing Knife Target Cardboard?

Throwing knives is a fun and challenging activity. It can be enjoyed by anyone with a little practice and patience. In the first tutorial of this article, we will learn how to make a knife-throwing target using cardboard and duct tape.

Materials needed:

  1. Cardboard Duct tape

  2. Scissors Markers

  3. Pencils

  4. Tape measure


  1. Gather a piece of cardboard, scissors and markers Make three small marks on the cardboard in a triangle with the points touching.

  2. Cut two circles from the cardboard of different sizes

  3. Cut two small triangles from the remaining part of the cardboard (this will be for attaching one to each circle)

  4. Attach the small triangles to the circles.

  5. Hang the finished product on a wall or door

How To Make A Throwing Knife Wood Target?

How to make a wood knife throwing target that can be used in the backyard or even in the woods.

We will start by measuring the length and width of your target. You should also measure the distance from where you are standing to your target. Once you have all of these measurements, cut out two pieces of plywood that are 21 inches long and 3 inches wide. Then, use a saw to cut out two circles from each piece of wood so they will fit together perfectly. Next, take two more pieces of plywood and cut them into strips that are 9 inches long and 1 inch wide. These strips will be used for attaching the targets to your wood base.

Finally, glue all three pieces together with wood glue so they won’t come apart, and so the target will be stationary.

Gather your materials:

  1. Two pieces of plywood that are 21 inches long and 3 inches wide

  2. Two more pieces of plywood that are 9 inches long and 1 inch wide

  3. Wood glue

  4. Sandpaper


Step 1: Take your two pieces of 9-inch long plywood and glue them together on one long side to form a square that is 21 inches. Take your two pieces of 3-inch wide plywood and glue them together on one side to form a square that is 9 inches. The piece should now be four boards wide by nine boards long ( forty-eight inches).

Step 2: Once you have the pieces together, find a way to anchor them together. Once you have a few different things you can use for this, use what is stronger on the surface, such as screws or nails that are pounded through both pieces of wood to hold them together. Alternatively, if your two boards are the same thickness, you can use nails or screws at the ends of each board to connect.

Step 3: Fill in between the boards with more wood, and use a router to cut out a groove into which a handle will be screwed.

Step 4: Sand the cut edges and the edge of the board, to make them smoother.

Step 5: Screw a handle on a small piece of wood, and glue it into the groove you created. with the cutting board.

What Can I Use For A Throwing Knife Target?

A throwing knife has a target usually made of natural materials like wood, bone, and horn. Materials used for targets are usually chosen based on the weight and hardness of the knife.

The materials used for a target can also be chosen according to the user’s preference. Some people prefer a light material while others want something that offers more resistance.

Throwing targets can be found in many types of stores, but it is important to know what you are looking for before you buy one.

There are many different types of throwing targets, but the most popular type is the steel target. Steel targets are usually made from galvanized steel, which means they will not rust and will last longer than other materials. Another popular type of throwing target is the wood target, which can be found at most sporting goods stores.

Throwing knives come in different shapes and sizes and some have a sharp point on one end while others have a blunt point on one end. It’s important to make sure that your knife or blade fits securely into your throwing target before you throw it so

How High Should A Knife-Throwing Target Be?

The height of a knife-throwing target is a key factor in the success of the throw. Throwing knives at low targets will result in less accuracy and more misses. The height of the target should be about 3 feet.

On average, there are about 5-6 inches between the ground and a person’s chest. So, it’s safe to say that knives would hit around 7-8 feet from someone standing on the ground.

What Can I Use For Axe Throwing Target?

Axe-throwing targets are made with different materials. Some of the common materials include wood, plastic, and steel. Knowing which material is best for you before purchasing an axe-throwing target is essential.

The most common material for making an axe-throwing target is steel. Steel targets are durable and can withstand a lot of abuse from axes without showing any damage or deformation. The downside to this material is that it can be difficult to find a suitable size that fits your needs. . Steel is also harder to work with than other materials for making targets. Wooden targets, on the other hand, are very common because they are easy to find and can be made from any wood. Wooden targets are also easy to make, but they require more upkeep. Varnish is applied regularly so that the wood will not rot or warp from the weather. When a target is first made, it is typically painted white, but as an object becomes older, the color will fade over time. Durable materials for wooden targets include wood from cedar trees, which is rot-resistant and becomes darker with age; locust wood (Cunningham IA lanceolate), which has a straight grain and can be found in hardwood forests where it resists decay; or cherry, which has a uniform grain and resists decay.

What Kind Of Material Do You Use To Throw Knives?

The most common material that is used as a knife is metal. It can be either steel or stainless steel. Other materials include wood, plastic, ceramic, and glass.

This question is a bit of a tricky one. There are many kinds of knives that you can use to throw. The most common ones are the metal throwing knife and the boomerang.

The throwing knife is a type of knife with a sharp point on the end of the blade which allows it to be thrown accurately and far, where it returns to its owner by spinning in flight. In contrast, the boomerang, which has two flat wings attached to either side of its central spine, is designed for returning to its point of origin after being thrown.

A boomerang, on the other hand, is a great tool to throw and to use it you only need to swing it around your body a few times and throw it. You would use the boomerang because it is easier to use than the metal throwing knife. You can also find them in different colors so that they are easily identifiable when they land on the ground.

DIY End Grain Knife Throwing Target

This is a DIY project for an end-grain knife-throwing target. A homemade end grain knife throwing target. The following are the materials you will need for this project:

  1. 1x3x4 inch wood,

  2. 2x2x1 inch wood,

  3. 1/4-inch plywood

  4. 2-inch screws

  5. 3/8-inch screws

  6. 4-inch screws

  7. Wood glue and nails to fasten the pieces together.


Step One: Lay out the 1x3x4 inch wood on your work surface, this will be the body of your target. Lay out the 2-inch screws in a grid pattern for use as a guide for drilling holes.

Step Two: Drill holes in the locations marked with dots and fasten one side of the 2x2x1 inch wood to the target body.

Step Three: Drill holes in the locations marked with dots and fasten one side of the 1x2x4 inch wood to the target body.

Step Four: Drill a small hole in one corner of a 3/4-inch PVC pipe, place it next to where you placed your last screw, and make sure it fits snugly. If it doesn’t, enlarge the hole with a drill bit.

Step Five: Drill the screw holes on either 2x2x1 inch wood piece and then screw them in place.

Step Six: Drill a hole through the 3/4-inch PVC pipe and then screw it in place.

Best DIY Knife Throwing Target

A DIY knife-throwing target is a great way to practice your skills and sharpen your accuracy. This target will help you hone your skills and improve your accuracy with practice.

In this section, I will provide you guys a list of the top 11 best DIY knife-throwing targets for you to choose from.

  1. Shotput Target – This is a fantastic way to practice throwing knives and a shot put at the same time! This target can be made by punching holes into large pieces of cardboard and then placing them over mop handles.

  2. Tin Can – This is great for practicing knife throws with a gun. Mark the edges of the can so you know which way to throw it so that it doesn’t hit anything.

  3. Iron or Rocks – For slower targets, use rocks or an iron skillet with a metal handle.

  4. Mason Jars – These jars are great for practicing speed and accuracy! Fill them with sand, rice, or water and place them at the base of your target.

  5. Boxes – Target boxes are great for practicing speed, technique, and accuracy.

  6. Stack of Books – This is a fun and easy way to practice knife and rifle throws! It’s great for practicing your aim, too! Here’s how to make one: Line a couple of books up with their spines facing the back of the target. Punch a hole in the top corners and thread string through them.

  7. Flypaper – This is a fun target to practice knife and rifle throws. Place flypaper on top of a box or books and you have yourself a target!

  8. Tires with Tags – This is a great target for rifle throwing, but it also requires you to use your sight picture which builds accuracy and speed over time.

  9. Baskets – For slower targets, use a basket.

  10. A Portable Target Stand – This is a great target to take with you, or if you’re ever in a pinch! It’s also great for practicing rifle and knife throws.

  11. A Closed Milk Crate – This is a fun way to practice rifle and knife throwing!

Best Wood For Knife Throwing Target

The best wood for knife-throwing targets is commonly hardwood.

Hardwoods are typically harder and denser than softwoods. They are also less likely to splinter or crack, making them a more durable option for knife-throwing targets.

The most common types of hardwoods used for knife-throwing targets include oak, beech, maple, and birch.

Knife throwing is a common sport that has been practiced for many centuries. The sport requires a target to be thrown at. One of the most common materials in use for a throwing knife target board is wood. Let’s dive in with the best wood for knife throwing as well as other important factors to consider when choosing a target.

The importance of choosing the best wood for knife throwing is crucial, it is what determines your success in the sport. Many different factors go into this decision, so this section will provide some of the most basic and important ones you should know about before making your decision.

  1. Durability: The durability of a target is very important because it determines how long it will last before needing to be replaced. A durable target should last years without breaking or needing repair work done on it.

  2. Cost: The cost of the target is something to consider as well because it will affect what types of guns can be used. A high-end gun might have a higher recoil and thus recoil energy for the shot, whereas a low-end, cheaper shotgun would not have the same amount of recoil and energy.

  3. Safety: The safety of a target is important because it will determine if members of the public should be able to use the target or not. A target that is not safe for members of the public would have to be surrounded by high fences, locked doors, and alarms.

  4. Convenience: This category includes factors such as ease of setup and storage as well as convenience of use.

To Sum It Up

The purpose of the target board is to make it easier to throw knives and achieve better accuracy.

A knife-throwing target is an object used in the sport of Knife Throwing, which is a competitive event that uses knives as projectiles. A target is usually composed of two circles separated by about 2 meters, with one circle for the thrower’s feet and the other for their head. The circles are called “halos” or “rings”.

It’s a nice activity to create your target board at home, feel free to do so, it’s fun, just stick to this tutorial and have some fun!

James Cruz

James Cruz

My love to knives started twenty years ago with my life partner Edi, Since then we developed a lifestyle that includes knives throwing, traveling and outdoors. Join us to our adventure and rest assure to become a knife thrower professional and outdoors lover !!

About Me

My love to knives started twenty years ago with my life partner Edi, Since then we developed a lifestyle that includes knives throwing, traveling and outdoors. Join us to our adventure and rest assure to become a knife thrower professional and outdoors lover !!

Recent Posts

Our Video Spot